Stikked

8tb smart

From Thundering Dove, 10 Months ago, written in Plain Text, viewed 158 times.
URL https://paste.steamr.com/view/6a86f51b Embed
Download Paste or View Raw
  1. # smartctl -a /dev/sde
  2. smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.1.67] (local build)
  3. Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family:     Seagate BarraCuda 3.5 (SMR)
  7. Device Model:     ST8000DM004-2CX188
  8. Serial Number:    ZCT04GY2
  9. LU WWN Device Id: 5 000c50 0b00a96e2
  10. Firmware Version: 0001
  11. User Capacity:    8,001,563,222,016 bytes [8.00 TB]
  12. Sector Sizes:     512 bytes logical, 4096 bytes physical
  13. Rotation Rate:    5425 rpm
  14. Device is:        In smartctl database 7.3/5387
  15. ATA Version is:   ACS-3 T13/2161-D revision 5
  16. SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
  17. Local Time is:    Thu Jan 11 17:26:22 2024 MST
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART Status not supported: Incomplete response, ATA output registers missing
  23. SMART overall-health self-assessment test result: PASSED
  24. Warning: This result is based on an Attribute check.
  25.  
  26. General SMART Values:
  27. Offline data collection status:  (0x82) Offline data collection activity
  28.                                         was completed without error.
  29.                                         Auto Offline Data Collection: Enabled.
  30. Self-test execution status:      (   0) The previous self-test routine completed
  31.                                         without error or no self-test has ever
  32.                                         been run.
  33. Total time to complete Offline
  34. data collection:                (    0) seconds.
  35. Offline data collection
  36. capabilities:                    (0x7b) SMART execute Offline immediate.
  37.                                         Auto Offline data collection on/off support.
  38.                                         Suspend Offline collection upon new
  39.                                         command.
  40.                                         Offline surface scan supported.
  41.                                         Self-test supported.
  42.                                         Conveyance Self-test supported.
  43.                                         Selective Self-test supported.
  44. SMART capabilities:            (0x0003) Saves SMART data before entering
  45.                                         power-saving mode.
  46.                                         Supports SMART auto save timer.
  47. Error logging capability:        (0x01) Error logging supported.
  48.                                         General Purpose Logging supported.
  49. Short self-test routine
  50. recommended polling time:        (   1) minutes.
  51. Extended self-test routine
  52. recommended polling time:        ( 966) minutes.
  53. Conveyance self-test routine
  54. recommended polling time:        (   2) minutes.
  55. SCT capabilities:              (0x30a5) SCT Status supported.
  56.                                         SCT Data Table supported.
  57.  
  58. SMART Attributes Data Structure revision number: 10
  59. Vendor Specific SMART Attributes with Thresholds:
  60. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  61.   1 Raw_Read_Error_Rate     0x000f   077   064   006    Pre-fail  Always       -       51388861
  62.   3 Spin_Up_Time            0x0003   095   087   000    Pre-fail  Always       -       0
  63.   4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       395
  64.   5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  65.   7 Seek_Error_Rate         0x000f   075   060   045    Pre-fail  Always       -       30184599
  66.   9 Power_On_Hours          0x0032   088   088   000    Old_age   Always       -       11356h+31m+55.725s
  67.  10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
  68.  12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       339
  69. 183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
  70. 184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
  71. 187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
  72. 188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       1 1 1
  73. 189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
  74. 190 Airflow_Temperature_Cel 0x0022   084   045   040    Old_age   Always       -       16 (Min/Max 15/16)
  75. 191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
  76. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       621
  77. 193 Load_Cycle_Count        0x0032   098   098   000    Old_age   Always       -       5022
  78. 194 Temperature_Celsius     0x0022   016   055   000    Old_age   Always       -       16 (0 15 0 0 0)
  79. 195 Hardware_ECC_Recovered  0x001a   077   064   000    Old_age   Always       -       51388861
  80. 197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
  81. 198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
  82. 199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
  83. 240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       8097h+20m+08.267s
  84. 241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       23082588293
  85. 242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       22869178840
  86.  
  87. SMART Error Log Version: 1
  88. No Errors Logged
  89.  
  90. SMART Self-test log structure revision number 1
  91. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  92.  
  93. SMART Selective self-test log data structure revision number 1
  94.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  95.     1        0        0  Not_testing
  96.     2        0        0  Not_testing
  97.     3        0        0  Not_testing
  98.     4        0        0  Not_testing
  99.     5        0        0  Not_testing
  100. Selective self-test flags (0x0):
  101.   After scanning selected spans, do NOT read-scan remainder of disk.
  102. If Selective self-test is pending on power-up, resume after 0 minute delay.
  103.  
  104. The above only provides legacy SMART information - try 'smartctl -x' for more
  105.  
  106.  

Reply to "8tb smart"

Here you can reply to the paste above

Powered by Stikked