Untitled

From Trivial Tortoise, 4 Years ago, written in Plain Text, viewed 242 times. This paste will give up the ghost in 1 Second.
URL https://paste.steamr.com/view/2a754063 Embed
Download Paste or View Raw
  1. leo # hdparm -I /dev/sdb                                                                                                                                         root@dell:/home/leo | Code 192 | 1 job | 17:46:47
  2.  
  3. /dev/sdb:
  4.  
  5. ATA device, with non-removable media
  6.         Model Number:       ST3000DM001-9YN166                      
  7.         Serial Number:      W1F0SJ27
  8.         Firmware Revision:  CC4B    
  9.         Transport:          Serial, SATA Rev 3.0
  10. Standards:
  11.         Used: unknown (minor revision code 0x0029)
  12.         Supported: 8 7 6 5
  13.         Likely used: 8
  14. Configuration:
  15.         Logical         max     current
  16.         cylinders       16383   16383
  17.         heads           16      16
  18.         sectors/track   63      63
  19.         --
  20.         CHS current addressable sectors:    16514064
  21.         LBA    user addressable sectors:   268435455
  22.         LBA48  user addressable sectors:  5860533168
  23.         Logical  Sector size:                   512 bytes
  24.         Physical Sector size:                  4096 bytes
  25.         Logical Sector-0 offset:                  0 bytes
  26.         device size with M = 1024*1024:     2861588 MBytes
  27.         device size with M = 1000*1000:     3000592 MBytes (3000 GB)
  28.         cache/buffer size  = unknown
  29.         Nominal Media Rotation Rate: 7200
  30. Capabilities:
  31.         LBA, IORDY(can be disabled)
  32.         Queue depth: 32
  33.         Standby timer values: spec'd by Standard, no device specific minimum
  34.         R/W multiple sector transfer: Max = 16  Current = ?
  35.         Advanced power management level: 128
  36.         Recommended acoustic management value: 208, current value: 0
  37.         DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
  38.              Cycle time: min=120ns recommended=120ns
  39.         PIO: pio0 pio1 pio2 pio3 pio4
  40.              Cycle time: no flow control=120ns  IORDY flow control=120ns
  41. Commands/features:
  42.         Enabled Supported:
  43.            *    SMART feature set
  44.                 Security Mode feature set
  45.            *    Power Management feature set
  46.            *    Write cache
  47.            *    Look-ahead
  48.            *    Host Protected Area feature set
  49.            *    WRITE_BUFFER command
  50.            *    READ_BUFFER command
  51.            *    DOWNLOAD_MICROCODE
  52.            *    Advanced Power Management feature set
  53.                 SET_MAX security extension
  54.            *    48-bit Address feature set
  55.            *    Device Configuration Overlay feature set
  56.            *    Mandatory FLUSH_CACHE
  57.            *    FLUSH_CACHE_EXT
  58.            *    SMART error logging
  59.            *    SMART self-test
  60.            *    General Purpose Logging feature set
  61.            *    WRITE_{DMA|MULTIPLE}_FUA_EXT
  62.            *    64-bit World wide name
  63.                 Write-Read-Verify feature set
  64.            *    WRITE_UNCORRECTABLE_EXT command
  65.            *    {READ,WRITE}_DMA_EXT_GPL commands
  66.            *    Segmented DOWNLOAD_MICROCODE
  67.            *    Gen1 signaling speed (1.5Gb/s)
  68.            *    Gen2 signaling speed (3.0Gb/s)
  69.            *    Gen3 signaling speed (6.0Gb/s)
  70.            *    Native Command Queueing (NCQ)
  71.            *    Phy event counters
  72.            *    READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
  73.                 DMA Setup Auto-Activate optimization
  74.                 Device-initiated interface power management
  75.            *    Software settings preservation
  76.            *    SMART Command Transport (SCT) feature set
  77.            *    SCT Write Same (AC2)
  78.                 unknown 206[7]
  79.                 unknown 206[12] (vendor specific)
  80.                 unknown 206[13] (vendor specific)
  81. Security:
  82.         Master password revision code = 65534
  83.                 supported
  84.         not     enabled
  85.         not     locked
  86.         not     frozen
  87.         not     expired: security count
  88.                 supported: enhanced erase
  89.         330min for SECURITY ERASE UNIT. 330min for ENHANCED SECURITY ERASE UNIT.
  90. Logical Unit WWN Device Identifier: 5000c500529df4f3
  91.         NAA             : 5
  92.         IEEE OUI        : 000c50
  93.         Unique ID       : 0529df4f3
  94. Checksum: correct
  95.  

Reply to "Untitled"

Here you can reply to the paste above